How To Clean Coretec Luxury Vinyl Flooring

COREtec Flooring  is non only beautiful, only it is also highly durable and waterproof. It merely takes a few simple care and maintenance steps to keep your floor looking beautiful for years, and brand the most affordable type of flooring.

Routine Maintenance

• Dust, sweep or vacuum the floor regularly to prevent any buildup of dirt or gritty substances that tin can scratch or dull the flooring. If you practise vacuum, do non utilize on with a beater castor, they can cause harm to the floor.
• Any spills should exist cleaned upwardly immediately with a damp mop or fabric.
• Mop or machine clean using 175-rpm "Swing-arm" machine or automobile scrubber with a 3M 5100 Blood-red pad (or equal).
• Occasionally make clean the flooring with a resilient flooring cleaner.

Preventive Care of COREtec Flooring

• Protective mats. Place mats exterior of all entrances and exits, and make sure to clean them on a regular ground. They will absorb soil and moisture and trap excessive clay, sand, grit, oil, asphalt, or driveway sealer that would otherwise be tracked within. Mats that are 100% latex-backed should be used. Do non use mats with rubber backing, as they tin discolor the flooring.
• Appliances. Exist enlightened that refrigerators, ranges or other oestrus-producing appliances, or hot air registers that produce oestrus over 120°F, can burn, fade or discolor your floor. Whatever hot objects, such every bit matches or cigarettes, tin also burn down and damage your COREtec flooring.
• Furniture legs. All the legs should have big surface floor protectors that are non-staining. Utilize flat, smooth glides to replace dome shaped, small, or narrow metal glides. To keep from scratching the floor, these glides should have self-agglutinative felt pads. They also demand to be checked regularly for wear and dirt and and so replaced when needed.
• Heavy appliances/piece of furniture. Whatever apparatus or article of furniture that is heavy and rarely moved should have flat furniture cups or casters that are not-staining and of appropriate size. The available sizes are round, one 3/8" to i 5/8", and square, i ½" to 2 5/viii".
• Moveable appliances/piece of furniture. Mobile appliances should have casters that swivel easily. These casters should have a diameter of 2" and ¾" hard rubber treads that are not-staining. Ball shaped casters should non exist used.
• Be careful of your anxiety. Avoid wearing stiletto-style heels, cleats, or spiked golf shoes on your flooring. They may crusade scratches and indentations.
• Sunlight protection. Keep window coverings closed during the times of 24-hour interval when there'due south heavy sunlight. COREtec floors can fade or become discolored if overexposed to the sunday.

After Installation Care of COREtec Floor

• To brand certain you get a proper seam bond on your COREtec flooring, protect the sealed seams and do not tamper with them for at least 16 hours after the application of the seam sealer.
• Do not put any furniture on the flooring until the grout and adhesive have had sufficient time to dry. Grouted vinyl floors need 48 hours and all other vinyl floors demand at to the lowest degree 24 hours.
• Be very careful when moving heavy appliances and furniture to prevent flooring impairment or trigger-happy. You should use strips of hardboard panels or plywood and lay them on the flooring. Then, have the piece of furniture or appliance and slide, roll or walk it beyond the boards.
• Clean the floor using a properly diluted Neutral pH cleaner (Hilway Direct – Neutral Cleaner) in cool water. Follow label instructions.

Source: https://www.bayviewflooring.com/care-maintenance-of-coretec-flooring/

Posted by: blackstockdonser.blogspot.com

Share this post